975-0082-01-01 35
Xanbus Automatic Generator Start Installation
Verifying Power Is Available
When the AGS has been installed properly, the Power and Network
indicator lights illuminate.
If one or both lights are out, check the network connections. Check the
Xanbus to ensure it has battery power. Check to make sure the other devices
in the network, such as the Xanbus System Control Panel (SCP), are
responding to confirm the network is still active.
Figure 26
Connecting the Xanbus System Control Panel (SCP)
Connect one or two network
cables as required by the
installation configuration.
Figure 27
Verifying Power is Available
Verify Power and Network
indicator lights are illuminated.
