975-0082-01-01 29
Xanbus Automatic Generator Start Installation
Connecting the Thermostats (optional)
Wires 1, 2, 3, and 4 on the wiring harness can be connected to two
thermostats. Wires 1 (yellow) and 2 (gray) are intended for thermostat 1 and
wires 3 (orange) and 4 (gray) are intended for thermostat 2.
These wires connect to 12-volt/24-volt output signals from the thermostats.
The AGS will start the generator in response to these signals. Thermostats
can not be programmed using the AGS.
For specific information about thermostat wiring and where AGS
connections should be made, please consult your thermostat documentation
or contact the thermostat manufacturer.
Table 1
Wiring for Connecting Thermostats
Wire
Number Function
Wiring Harness
Wire Color
1 Thermostat 1 input (12/24 V) Yellow
2 Thermostat 1 return (ground) Gray
3 Thermostat 2 input (12/24 V) Orange
4 Thermostat 2 return (ground) Gray
