Sanyo PLC-XU305A Manual

A SERVICE OF

next previous

68

Appendix

–CheckPCadjustmenuorScreenmenuandadjustthem.

Seepages33-34,37-38.

 –PINcodelockisbeingset.EnteraPINcode("1234"ornumbers

   youhaveset).Seepages21,56-57.

–MakesureyourcomputerisconnectedtotheprojectorwithUSB

 cable.Seepage16.      

  –Checkcableconnectionbetweentheprojectorandyourcomputer.

   Seepage16.

 –Checkthebatteries.



  –Makesurenoobstructionisbetweentheprojectorandremote

  control.

  –Makesureyouarenottoofarfromtheprojectorwhenusingthe

   remotecontrol.Maximumoperatingrangeis16.4'(5m). 

 –Makesurethecodeoftheremotecontrolisconformedtothe 

  projector’scode.Seepage55

  –UnlocktheKeylockfunctionfortheremotecontrolfunction.See

   page56.

  –CheckRESET/ON/ALL-OFFswitchontheremotecontrolissetto

“ON”.Seepage13.

 –Checkthestatusoftheprojectorwithreferringto"Indicators and

projector Condition".Seepage72.    

 

  –Checktheconnectionbetweentheprojectorandyourcomputer.

 –Checkthemousesettingonyoucomputer.   

  –Makesurethemousedriverisinstalledonyourcomputer, 

   otherwise,theremotecontrolcannotbeusedasawirelessmouse.

  –Makesurethesignalisfromthecomputer,otherwise,theremote

   controlcannotbeusedasawirelessmouse.   

  –Turnontheprojectorbeforeturningonthecomputer.

  –Youroperationisinvalid.Operatecorrectly.   



–Thetopcontrolisnotavailableifthetopcontrolislockedat

Key lock

  underSecurityofSETTINGsection.Seepage56.

  –Contactthedealerwhereyoupurchasedtheprojectorortheservice

   center.       



The image is distorted or runs off.

PIN code dialog box appears at

start-up.

Page Up/Down function does not

work.

The Remote Control does not work.

Indicator blinks or lights.

Wireless Mouse function does not

work.

The exclamation mark appears on

the screen.

Top control does not work.

Unable to unlock the Logo PIN code

lock, Security key lock or Security

PIN code lock.