Sanyo PLC-XU305A Manual

A SERVICE OF

next previous

19

Installation

Connecting the AC Power Cord

Thisprojectorusesnominalinputvoltagesof100-120Vor

200–240VACanditautomaticallyselectsthecorrectinput

voltage.Itisdesignedtoworkwithsingle-phasepower

systemshavingagroundedneutralconductor.Toreduce

theriskofelectricalshock,donotplugintoanyothertypeof

powersystem.

Ifyouarenotsureofthetypeofpowerbeingsupplied,

consultyourauthorizeddealerorservicestation.

Connecttheprojectorwithallperipheralequipmentbefore

turningtheprojectoron.

Note:

UnplugtheACpowercordwhentheprojectorisnot

inuse.Whenthisprojectorisconnectedtoanoutlet

withtheACpowercord,itisinStand-bymodeand

consumesalittleelectricpower.

Connect theAC power cord (supplied) to the

projector.

TotheACoutlet.

(200 - 240 V AC)

NOTE ON THE POWER CORD

ACpowercordmustmeetrequirementofthecountrywhereyouusetheprojector.

ConfirmtheACplugtypewiththechartbelowandproperACpowercordmustbeused.

IfsuppliedACpowercorddoesnotmatchyourACoutlet,contactyoursalesdealer.

Topowercord

connectoronyour

projector.

Projector side

AC outlet side

Ground

TotheACoutlet.

(120 V AC)

For the U.S.A. and Canada

TotheACoutlet.

(200 - 240 V AC)

For the U.K.For Continental Europe



CAUTION

TheACoutletmustbenearthisequipmentandmustbe

easilyaccessible.