50
Capture
Capture
This function enables you to capture an image being
projected to use it for a starting-up display or interval of
presentations.
SelectcaptureandpresstheSELECTbutton.
AconfirmationboxappearsandselectYestocapturethe
projectedimage.
Aftercapturingthe projectedimage,gotothe Logoselect
functionandsetittoUser.Thenthecapturedimagewillbe
displayedthe nexttime youturn onthe projectororwhen
youpresstheNOSHOWbutton(seepage28).
Tocancelthecapturefunction,selectYesinthe"Quit?"
confirmationbox.
Note:
•Before capturing an image, select
Standard in the
Imageselect Menu tocapturea properimage (pp.35,
42).
•A signal from acomputer canbecaptured uptoXGA
(1024 x768).Asignal from video equipment canbe
capturedexceptfor720p,1035iand1080i.
•When capturing the imagethat hasbeen adjustedby
theKeystonefunction,theadjusteddataisautomatically
reset and the projector captures an image without
keystonecorrection.
•WhenLogo PIN code lockissettoOn,capturecannot
beselected.
•Whenstartingtocapturea new image, the previously
storedimageisclearedevenifyoucancelthecapturing.
•When there is no captured image or it is interrupted
whilecapturinganimage,Usercannotbeselected,you
canonlyswitchbetweenDefaultandOff.
Logo PIN code lock
Thisfunctionpreventsanunauthorizedpersonfrom
changingthescreenlogo.
Off...........Thescreenlogocanbechangedfreelyfrom
theLogoMenu(p.49).
On...........Thescreenlogocannotbechangedwithouta
LogoPINcode.
If you want tochange the Logo PIN code lock setting,
pressthe SELECTbutton and the Logo PINcodedialog
boxappears.EnteraLogoPINcodebyfollowingthesteps
below.The initialLogo PIN code is set to "4321" at the
factory.
Logo PIN code lock
Setting