Sanyo PLC-XU305A Manual

Open as PDF

next previous

Part Names and Functions

Spotlight

Pointer Function

Pointer

Laser Pointer Function

LASERbutton

PRESENTATIONPOINTER

button

Thisremotecontrol emitsalaser beamfrom thelaserlight window.Press theLASERbutton toactivatethe

laserpointer.Thesignalemissionindicatorlightsredandtheredlaserbeamisemitted.IftheLASERbuttonis

pressedformorethanoneminuteorifitisreleased,thelaserlightgoesoff.

ThelaseremittedisaClassIIlaser.Donotlookintothelaserlightwindoworpointthelaserbeamatyourselfor

otherpeople.Thefollowingisthecautionlabelforthelaserbeam.

CAUTION: Useofcontrols,adjustmentsorperformanceofproceduresotherthanthosespecifiedhereinmay

resultinhazardousradiationexposure.Neverlookdirectlyintothelaserlightwindowwhilealaser

isemitted,otherwiseeyedamagemayresult.

Thecautionlabelisputontheremotecontrol.

YoucanmovetheSpotlightorPointeroftheprojectorwiththeremotecontroltoemphasizeapartofthe

projectedimage.

Press andholdthe MENUandNO SHOWbuttonsfor

more than 5 seconds to activatethe Pointerfunction.

(TheLaserpointerhasswitchedtothePointerfunction.)

PresstheLASERbuttonontheremotecontrolpointing

toward the projector. The Spotlight or Pointer is

displayedonthescreenwiththeLASERbuttonlighting

green. Then move the Spotlight or Pointer with the

PRESENTATIONPOINTERbutton.IftheLASERbutton

doesnotlightgreenandcontinuestoemitalaserbeam,

try the abovementioned procedure until the LASER

buttonlightsgreen.

Toclearthe Spotlightor Pointeroutthescreen,press

theLASERbuttonpointingtowardtheprojectorandsee

iftheLASERbuttonlightingisturnedoff.

ToswitchtotheLaserpointeragain,pressandholdthe

NOSHOWandMENUbuttonsformorethan5seconds

orslidetheRESET/ON/ALL-OFFswitchtoRESETand

thentoON.

WhenyouresetthePointerfunction,theremotecontrol

codewillbereset,aswell.

Note:

 You can choose the size of Spotlight (Large/Middle/

Small) andthepattern ofPointer (Arrow/Finger/Dot) in

theSettingMenu.See“Pointer”onpage52.

After the Laserpointer has

switchedtothePointer,use

the LASER button asthe

Pointer function ON-OFF

switch. Press the LASER

button pointing toward the

projectorandseeifit lights

green.

LaserLightWindow

SignalEmissionIndicator

MENUbutton

NOSHOWbutton

Press and holdthe MENU

andNOSHOW buttons for

morethan5seconds.

PRESENTATIONPOINTER

button