Bluetooth Indicators
Bluetooth Indicators
The Bluetooth taskbar Icon state changes as Bluetooth devices are discovered, pair, connect and disconnect.
There may be audible or visual signals as paired devices re-connect with the MX3X.
Only LXE printers or scanners are recognized and displayed in the Bluetooth panel. All other Bluetooth devices are ignored.
Taskbar Icon Legend
Bluetooth module is connected to one or more of the targeted Bluetooth device(s).
MX3X is not connected to any Bluetooth device.
MX3X is ready to connect with any Bluetooth device.
MX3X is out of range of all paired Bluetooth device(s). Connection is inactive.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the MX3X Bluetooth scan range, the
Bluetooth connection between the paired device and the MX3X is lost. There may be audible or visual signals as paired
devices disconnect from the MX3X.
AppLock, if installed, does not stop the end-user from using Bluetooth applications, nor does it stop authorized Bluetooth-
enabled devices from pairing with the MX3X while AppLock is in control. .
Bluetooth Barcode Reader Setup
Please refer to the Bluetooth scanner manufacturer’s User Guide; it may be available on the manufacturer’s web site. Contact
your LXE representative for Bluetooth product assistance.
Introduction
LXE supports several different types of barcode readers. This section describes the interaction and setup for a mobile
Bluetooth laser scanner or laser imager connected to the MX3X using Bluetooth functions.
Prerequisites
l The MX3X has the Bluetooth hardware and software installed. An operating system upgrade may be required. Contact
your LXE representative for details.
l If the MX3X has a Bluetooth address identifier barcode label affixed, then Bluetooth hardware and software is installed.
l The mobile Bluetooth laser scanner / laser imager battery is fully charged.
l The MX3X main battery is fully charged. Alternatively, the MX3X may be in a powered cradle or cabled to AC/DC
power.
l Important: The barcode numbering examples in this segment are not real and should not be created nor scanned with a
Bluetooth scanner.
l To open the LXEZ Pairing program, tap Start | Settings | Control Panel | Bluetooth or tap the Bluetooth icon on the
desktop or tap the Bluetooth icon in the taskbar.
E-EQ-MX3XRG-W-ARC [ 84 ] MX3X Reference Guide
