RX Diversity
RX Diversity
How to handle antenna diversity when receiving packets from AP.
Options:
Main Only (use main antenna only)
Aux Only (use aux. antenna only)
On-start on Main (On startup use main antenna)
On-start on Aux (On startup use aux antenna)
Default:
On-start on Main (802.11b/g radio)
Main Only (802.11a/b/g radio)
The value for this parameter should be set as follows:
Antenna Configuration RXDiversity
A Main and BG Main Main Only
A Main and A Aux On-start on Main
BG Main and BG Aux On-start on Main
A Main only Main Only
BG Main only Main Only
Frag Thresh
If the packet size (in bytes) exceeds the specified number of bytes set in the fragment threshold, the packet is fragmented
(sent as several pieces instead of as one block). Use a low setting in areas where communication is poor or where there is a
great deal of radio interference.
Options:
256 to 2346
Default:
2346
E-EQ-MX3XRG-W-ARC [ 198 ] MX3X Reference Guide
