Scanner Wedge
Scanner Wedge
Start | Settings | Control Panel | Scanner
Set MX3X scanner keyboard wedge parameters, enable or disable allowed symbologies, scanner icon appearance, active
scanner port, and scan key settings.
Assign baud rate, parity, stop bits and data bits for available COM ports.
Parameters on the Main tab and the COM tab(s) apply to this device only.
Barcode manipulation parameter settings on the Barcode tab are applied to the incoming data resulting from successful
barcode scans sent to the MX3X for processing. The successful barcode scan data may be sent by
l an integrated scanner in the endcap,
l a wireless Bluetooth Handheld Scanner,
l or a tethered scanner.
Integrated scanner configuration can be changed using the Scanner Control Panel or via the LXE API functions. While the
changed configuration is being stored, the Scanner LED is solid amber. The scanner is not operational during the configuration
update.
Note: The integrated scan engine activates when a Scan button on the front of the MX3X is pressed.
After scanning the Reset All (or equivalent) barcode with the mobile device’s integrated scan engine, the next step is to open
the Control Panel Scanner applet, click the OK button and then close the Control Panel. This action will synchronize all
scanner formats.
E-EQ-MX3XRG-W-ARC [ 121 ] MX3X Reference Guide
