EAP-TLS
EAP-TLS
To use EAP-TLS, make sure the following profile options are used.
l Enter the SSID of the Access Point assigned to this profile
l Set EAP Type to EAP-TLS
l Set Encryption to WPA TKIP
l Set Auth Type to Open
EAP-TLS Profile Configuration
See Sign-On vs. Stored Credentials for information on entering credentials.
Click the Credentials button.
l No entries except the User Certificate Filename and the CA Certificate Filename are necessary for Sign-On Credentials
as the user will be prompted for the User Name and Password when connecting to the network.
l For Stored Credentials, User, Password and the CA Certificate Filename must be entered.
Enter these items as directed below.
EAP-TLS Credentials
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
Leave the certificate file name entries blank for now.
E-EQ-MX3XRG-W-ARC [ 217 ] MX3X Reference Guide
