File Menu Options
File Menu Options
Connect
The Connect option under the File menu allows the user to initiate a manual
connection to the Mobile Device Server. The connection methods, by default, are
wireless and COM connections. Any updates available will be applied to the
MX3X immediately upon a successful connection.
Scan Config
Note: LXE does not support the Scan Configuration feature. The Scan Config
option under the File menu allows the user to configure Enabler settings using a
special barcode that can be created using the Avalanche MC Console utilities.
Refer to the Wavelink Avalanche Mobility Center User Guide for details.
Settings
The Settings option under the File menu allows the MX3X user to access the
control panel to locally configure the Enabler settings. The Enabler control panel
is, by default, password protected.
The default Settings password is
system
The password is not case-sensitive.
Avalanche Update using File | Settings
Use these menu options to setup the Avalanche Enabler on the MX3X. LXE recommends changing settings and then saving
the changes (reboot) before connecting to the network.
Alternatively, the Mobile Device Server can be disabled until needed (refer to the Wavelink Avalanche Mobility Center
User’s Guide for details).
E-EQ-MX3XRG-W-ARC [ 159 ] MX3X Reference Guide
