Bluetooth
Bluetooth
Access: Start | Settings | Control Panel | Bluetooth
Discover and manage pairing with nearby Bluetooth devices.
Factory Default Settings
Discovered Devices None
Settings
Turn Off Bluetooth Disabled
Report when connection lost Enabled
Report when reconnected Disabled
Report failure to reconnect Enabled
Computer is connectable Enabled
Computer is discoverable Disabled
Prompt if devices request to pair Disabled
Continuous search Disabled
Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are discovered, pair, connect and
disconnect. There may be audible or visual signals as paired devices re-connect with the MX3X.
l The default Bluetooth setting is On.
l The MX3X cannot be discovered by other Bluetooth devices when the Computer is discoverable option is disabled
(unchecked) on the Settings panel.
l Other Bluetooth devices cannot be discovered if they have been set up to be Non-Discoverable or Invisible.
l The MX3X can pair with one Bluetooth scanner and one Bluetooth printer.
l It is not necessary to disconnect a paired scanner and printer before a different scanner or printer is paired with the
MX3X.
l The target Bluetooth device should be as close as possible (line of sight) to the MX3X during the pairing process.
Assumption:The System Administrator has Discovered and Paired targeted Bluetooth devices for the MX3X. The MX3X
operating system has been upgraded to the revision level required for Bluetooth client operation.
E-EQ-MX3XRG-W-ARC [ 75 ] MX3X Reference Guide
