TWAIN driver user interface
Figure 2-10 TWAIN driver user interface
The TWAIN user interface contains the following options:
■ New Scan. Use this control to rescan the image. Flatbed previews are always at 75 dpi and in color:
■ Accept. Use this control to rescan the image if the original is on a flatbed scanner and then to send
the image back to program with the specified settings.
■ Resize. Use this control to change the selection area for final scan. The final scan is performed
within this selection area.
■ Lighten/Darken. Use this control to lighten or darken the scanned image.
■ Color Adjustment. Use this control to adjust the color on the scanned image.
■ Resolution. Use this option to designate the final resolution for the image. The software interpolates
resolutions that are above 1200 dpi.
■ Mirror. Use this option to flip the scanned image horizontally.
■ Invert Colors. Use this control to invert the colors in the scanned image.
■ Descreen. Use this control to apply a special algorithm that detects and removes undesirable
patterns from the scanned image. Choosing this option automatically triggers a rescan because the
descreen operation must take place as the image data is flowing in from the scanner.
■ Rotate. Use this control to rotate the scanned image 90°.
42 Chapter 2 Software overview for Windows ENWW
Software overview for
Windows
