Figure 5-15 hp all-in-one Setup Assistant – Select Device
NOTE If you have not yet connected the product to your computer, the No devices found
message appears instead of a list of HP all-in-one products. Connect the product to the computer
with the USB cable, turn on the HP Color LaserJet 2820/2830/2840, and then click Rescan
USB. The HP LaserJet all-in-one product appears in the list box.
When you click USB, the HP Color LaserJet 2820, HP Color LaserJet 2830, or HP Color LaserJet 2840
all-in-one product name appears in the list box. Click the product name, and then clickNext to the open
the User Identification dialog box.
When you click TCP/IP and then click, Create, a text-entry dialog box opens and you can type the
network address or name for the HP Color LaserJet 2820/2830/2840 all-in-one product.
Click Back to return to the Introduction dialog box.
Click the Rescan button to scan the system again and locate the designated product connection.
ENWW
Installation dialog-box options for Macintosh
175
Macintosh software
overview
