Paper Options group box
The settings specified in the Paper Options group box on the Paper tab apply to all of the pages of the
document. The following illustration shows the Paper Options group box and the selections that are
available by default.
Figure 4-11 Paper Options group box
The appearance of the Paper Options group box changes when the Use Different Paper/Covers
check box is selected. In this section of this guide, the settings in the Paper Options group box are
described below in the following order:
●
Size is:
●
Custom Paper Size
●
Use Different Paper/Covers check box
●
Use Different Paper/Covers options
●
Source Is: drop-down menu
●
Type is: drop-down menu
Size is:
The Size is: setting is a drop-down menu that lists all of the supported media sizes.
You can specify size for all the settings in the Paper Options group box. You must use the same size
of media for the entire print job. That is, if the print job uses Letter-size media, any option that you select
from the available Use Different Paper options must also use Letter-size media.
NOTE Certain software programs can override the size command and specify different media
sizes within a single document.
For the Other Pages and Back Cover settings, you can select a source (tray) and media type that differ
from the settings selected for First Page. If a conflict exists among media source, media size, and/or
ENWW
HP Traditional PCL 6 Driver features (for Windows 98 SE and Windows Me)
121
Windows HP traditional
driver features
