The Network Configuration screen provides an overview of the network settings that have been
enabled for the device. The settings appear under the following headings:
■ Network Hardware Configuration
■ Enabled Features
■ TCP/IP
■ SNMP
■ Network Statistics
A Print link and icon appear in the upper right corner of the screen. Click the link or icon to open a print
dialog box and print out a copy of the network configuration settings.
Password
The Password screen is shown in the following illustration.
Figure 6-83 Password screen
Network administrators can set user passwords to protect network settings. Once a password is set,
only users who know the password have access to the Network Settings tab. If a password has been
set, users are prompted to type the password. If the typed-in password matches the password stored
in the device, users can navigate through the Network Settings screens and make changes to the
settings. Users who do not type the correct password within three attempts are not allowed access to
the Network Settings screens.
If the password is lost or forgotten, the factory settings for the HP Color LaserJet 2820/2830/2840 must
be restored and a new password assigned. To restore factory settings, see
Figure 6-58 Service screen
NOTE The same user password is used to protect the settings for the Memory Card screen
on the Print Settings tab.
Other screens
The following table lists screens that are also available through the HP Toolbox.
284 Chapter 6 The HP Toolbox ENWW
The HP Toolbox
