Filter
Top Products
31
REPAIR PART LIST – P2DHX16F12001A
ITEM DESCRIPTION
1 Side Panel, Right and Left (2 Req’d)
2 Side Panel (Heat Exchanger (2 Req’d)
3 Panel, Rear
4 Assembly, Blower Division Panel
5 Support, Base Heat Exchanger
6 Panel, Front
7 Door, Blower Access
7A Handle, Door
7B Bezel, Logo
7C Label, Logo
8 Panel, End
9 Assembly, Heat Exchanger
10 Bracket, Firepot Retainer
11 Chamber, Replacement Combustion
12 Assembly, Oil Burner Mounting Plate
12A Gasket, Inspection Door (Right)
12B Gasket, Inspection Door (Left)
12C Gasket, Inspection Door (Center)
13 Assembly, Flue Collector
14 Cover, Flue Collector
15 Gasket, Pouch (2 Req’d)
16 Gasket, Flue Pipe (2 Req’d)
17
Assembly, Radiator Cleanout Cover (2 Req’d)
17A Gasket, Cleanout Cover (2 Req’d)
18 Cover, Casing Clean-out (2 Req’d)
19 Frame, Filter
20 End Support, Filter Frame
21 Filter, Air - 16 x 25 x 1 (Permanent)
22 Box, Junction
23 Limit Switch, Secondary - 200 Deg. F.
ITEM DESCRIPTION
24 Control, Fan & Limit (set @ 220 Deg. F.)
25 Harness, Fan & Limit Wire
26 Blower Direct, Wire Harness
27 Center, Fan
27A Relay, Replacement
28 Regulator, Draft
29 Burner, Oil
29A Burner, Motor
29B Pump, Oil
29C Ignitor, Solid State
29D Control, Primary Combustion
29E Combination, Air Tube
Head, Flame Retention (120,000 BTU)
29F
Head, Flame Retention (130,000 BTU)
Nozzle 1.00/ 60 Deg. A
29G
Nozzle 1.00/ 70 Deg. A
30 Assembly, Blower (Complete)
30A Housing and Wheel, Blower
30B Wheel, Blower
30C Motor, Blower
30D Band, Motor Mount
30E Arms, Motor Mount (3 Req’d)
30F Capacitor, Run
30G Strap, Capacitor
30H Insulator, Capacitor
30I Side Rail, Blower (2 Req’d)
30J Bracket Blower Front
31 Limit, Auxillary (130 Deg. F.)