Filter
Top Products
84
PERFORMANCE MODE
3 Press the
ENTER ENTER
ENTER ENTER
ENTER button to actually execute the Copy operation.
An “Executing…” message flashes in the display during the op-
eration. When the data has been copied, the MU50 returns to
the Performance Edit menu.
To cancel the operation without copying, press the
EXITEXIT
EXITEXIT
EXIT button
(before pressing
ENTERENTER
ENTERENTER
ENTER).
Store
Once you’ve edited or created a Performance, you can save that new Per-
formance for future recall by using the Store operation. Performances can
be saved to any one of the 128 Internal memory locations. With the excep-
tion of the Receive Channel and Transpose (Note Shift) settings made from
the Play screen, all parameter settings in the Play screen and in the Edit
and Effect modes are saved to the selected Performance number.
Operation
1 From the Performance Edit menu, use the
SELECT SELECT
SELECT SELECT
SELECT w buttons
to select “STORE.” Then, press the
ENTER ENTER
ENTER ENTER
ENTER button to call up the
Store operation.
Memory location (P = Preset, I = Internal)
Source Performance number
Destination Performance number
Use these to select desired parameter.
Use these to change value.