Filter
Top Products
UTILITY MODE
97
ceived. This should be to On when receiving bulk data from a MIDI
data storage device. (See page 102.)
Receive Bank Select (RcvBankSel)
Settings: off, on
Default: on
This determines whether Bank Select messages are received or not.
Bank Select messages can be sent from another MIDI device to
change the banks of Voices on the MU50. The On setting allows
Bank Select messages to be received.
Contrast
Range: 1 — 8
Default: 2
This determines the contrast of the display. Adjust this as necessary for
optimum visibility. (At extreme settings, the display may not be readable.)
Dump Interval (DumpIntrval)
Settings: 50, 100, 150, 200, 300
Default: 150
This determines the length of time the MU50 pauses when sending
blocks of data in the Dump Out functions. If the receiving device
fails to process the data or displays a “buffer full” type message, try
setting this parameter to a higher value and send the data again.