Filter
Top Products
54
MULTI MODE
For
TG300BTG300B
TG300BTG300B
TG300B mode:
The settings normal and drumS1, drumS2 are available; drum can-
not be selected. When normal is selected, either the basic or the ex-
tended set of Voices (for the TG300B mode) can be used for the Part.
For
C/MC/M
C/MC/M
C/M mode:
The Part Mode settings are fixed in this mode and cannot be changed:
Part 10 is set to drumS1, and all other Parts are set to normal. The
MIDI Receive Channel setting for Part 1 is set to off. The 128 Voices
of C/M Type 1 can be used for Parts 1 — 9; the 64 Voices of C/M Type
2 can be used for Parts 11 — 16.
For
DOCDOC
DOCDOC
DOC mode:
The Part Mode settings are fixed in this mode and cannot be changed:
Parts 1 through 10 are set to normal and Part 15 is set to drumS1.
For
PERFORMPERFORM
PERFORMPERFORM
PERFORM (Performance) mode:
All four Parts are set to normal; none of the drum settings are avail-
able. Any of the basic or the extended set of Voices can be used for each
Part.
NOTE
When two or more different Parts are set to the same editable drum setup (
drumS1 drumS1
drumS1 drumS1
drumS1 or
drumS2drumS2
drumS2drumS2
drumS2), any edits made to that drum setup automatically affect all those Parts. For example,
when two Parts are set to
drumS1drumS1
drumS1drumS1
drumS1, any changes made to
drumS1drumS1
drumS1drumS1
drumS1 affect both Parts.
Mono/Poly Mode
Height of bars indicates selected Mono/Poly Mode setting for each
Part. (A single bar indicates “mono” setting, while full height indicates
“poly.”)
Selected Part and MIDI channel
Settings: mono, poly
Default: poly
This determines whether the Part’s Voice is played monophonically
(only one note at a time) or polyphonically (up to 32 notes at a
time). This parameter is not available when the Part Mode is set to
Drum.