Filter
Top Products
24
GUIDED TOUR
Using the INPUT Jack
The MU50 also features an INPUT function that allows you to connect an
external audio source (such as an electric guitar, keyboard or CD player)
and mix in those signals with the MU50’s Voices — without the need for
an external mixer. For example, this allows you to play a guitar or keyboard
over backing tracks played with the MU50’s Voices from a MIDI
sequencer. The INPUT jack is a stereo input, and the left and right chan-
nels are indicated on the display as A1 and A2, with corresponding level
meter bars for indicating the signal levels.
Operation
1 Turn down the INPUT control on the front panel.
2 Connect the cable from the external sound source to the INPUT
jack.
NOTE
The INPUT jack accepts stereo signals. The left channel corresponds to the tip of the 1/4"
plug and the right corresponds to the ring.
3
Slowly bring up the INPUT control on the front panel and play the
external instrument or sound source until the level is appropriate.
NOTE
When the MU50 receives a mono signal, only the A1 (left) level meter bar is indicated.