Filter
Top Products
EFFECT EDIT MODE
91
Common Parameters (Insertion connection):
Dry/Wet
Range: D63>W — (D=W) — D<W63
Adjusts the level balance of original sound (dry, or D) and processed
sound (wet, or W). A setting of (D=W) results in an equal balance
of dry and wet sound.
Assignable Controller 1 Variation Control (AC1VarCtrl)
Range: 0 — 127
Determines the amount of effect the Assignable Controller has on
the Variation effect.
Common Parameters (System connection):
Variation Pan (VarPan)
Range: L63 — C — R63
Determines the pan position of the Variation effect.
Send Variation to Chorus (SendVar→Cho)
Range: 0 — 127
Determines the amount of Variation effect sound that is sent to the
Chorus effect.
Send Variation to Reverb (SendVar→Rev)
Range: 0 — 127
Determines the amount of Variation effect sound that is sent to the
Reverb effect.
Variation Connection (VarConnect)
Settings: INS (Insertion), SYS (System)
Determines how the Variation effect is connected in the effect chain
of the MU50. When set to SYS (System), Variation is applied to all
Parts, according to the amount of Variation Send set for each Part.
When set to INS (Insertion), Variation is applied to only the selected
Part, set in Variation Send. (See page 92.)
NOTE
The common parameters above are common to nearly all the Variation effect types. (Excep-
tions are described in the separate
SOUND LIST & MIDI DATASOUND LIST & MIDI DATA
SOUND LIST & MIDI DATASOUND LIST & MIDI DATA
SOUND LIST & MIDI DATA booklet.