Filter
Top Products
Installation
52 975-0126-02-01
Cabling & Hook-up Configurations
Several smaller batteries can be connected to create a battery bank of substantial
size. You can connect batteries in three ways: in parallel, series, or series-parallel.
To make a larger battery bank, connect individual batteries with heavy cables. The
actual size of the cable depends on whether the batteries are connected in parallel
or series. Generally, the cable should not be smaller than the inverter cables—if
the main cables are 4/0 AWG, the battery interconnects should be 4/0 AWG.
The best configuration is to connect the batteries in series and parallel. This
requires additional cables, but reduces imbalances in the battery bank and can
improve the overall performance. Consult your battery supplier for more
information regarding the hook-up configuration required for your system.
Parallel Connection
Batteries are connected in parallel when all the positive terminals of a group of
batteries are connected and then, separately, all the negative terminals are
connected. In a parallel configuration, the battery bank has the same voltage as a
single battery, but an Ah rating equal to the sum of the individual batteries. See
Figure 19.
Figure 19
Batteries Connected in Parallel