Filter
Top Products
20 Hydraulic Installation
MAN0041 (Rev. 4/4/2008)
1023577 Hose Kit
Assemble Loader Hoses
1. Attach male half of quick coupler set (5) and
elbow (2) to each of the loader feedline hoses (4).
See Figure 34
2. Attach loader feedline hoses to the steel feedlines
on the loader boom. See Figure 35.
3. Route hydraulic hoses along loader mount and
under the right side of operator's platform to the
tractor valve.
NOTE: Be sure to avoid contact with brake ped-
als and other moveable tractor components.
Hoses must be routed so that they are not
pinched, bent sharply, or chafed during operation.
Hoses must not interfere with any tractor control
operation or contact any moving parts.
2. 313015 Elbow, 3/8 NPTM x 3/8 NPTF 45°
4. 1022986 Hose, 116" x 3/8 NPTM x 3/4 JICM
5. 316007 Quick coupler set, male & female
Figure 34. Loader Hose Connection
Figure 35. Loader Feedline Connection
Connect Hoses to Tractor Valve
Connect hoses to the hydraulic quick couplers as
shown in Figure 36.
Figure 36. Hydraulic Hose Connection to
Tractor Valve
D
B
A
C
DP9