Filter
Top Products
Hydraulic Installation 17
MAN0041 (Rev. 4/4/2008)
1010460 Hose Kit
Assemble Loader Hoses
1. Attach male half of quick coupler set (5) and
elbow (2) to each of the loader feedline hoses (4).
See Figure 27.
2. Attach loader feedline hoses to the steel feedlines
on the loader boom. See Figure 28.
3. Route hydraulic hoses along loader mount and
under the right side of operator's platform to the
tractor valve.
NOTE: Be sure to avoid contact with brake ped-
als and other moveable tractor components.
Hoses must be routed so that they are not
pinched, bent sharply, or chafed during operation.
Hoses must not interfere with any tractor control
operation or contact any moving parts.
2. 313015 Elbow, 3/8 NPTM x 3/8 NPTF 45°
4. 1009513 Hose, 76" x 3/8 NPTM x 3/4 JICM
5. 316007 Quick coupler set, male & female
Figure 27. Loader Hose Connection
Figure 28. Loader Feedline Connection
Connect Hoses to Tractor Valve
Connect hoses to the hydraulic quick couplers as
shown in Figure 29.
Figure 29. Hydraulic Hose Connection to
Tractor Valve
D
B
A
C
DP9