Filter
Top Products
Hydraulic Installation 19
MAN0041 (Rev. 4/4/2008)
1023577 HOSE KIT
General Description
These set-up instructions are for operating the LU126
or LU132 loader using the tractor hydraulic remote
control lever. To use this hydraulic connection, the
tractor must be equipped with a multi-function hydrau-
lic control valve and remote control lever. The control
valve is located on the right side of the tractor
beneath the operator platform.
Figure 31. Tractor Remote Control Lever
Install Hydraulic Fitting to Tractor Valve
1. Locate the tractor hydraulic valve under the right
side of the tractor platform.
2. Install adapters (1), adapter (3), and female half
of quick coupler set (5) to each of the tractor valve
ports. See Figure 32 and Figure 33.
NOTE: Not all parts supplied with this hose kit are
used for this application.
1. 1010920 Adapter, M22 x 1.5 x 3/4 JICM
3. 315036 Adapter, 3/8 NPTM x 3/4 JICF
5. 316007 Quick coupler set, male & female
Figure 32. Hydraulic Fittings Installed
Figure 33. Hydraulic Fitting Installation
DP1
DP4