Filter
Top Products
8 Hydraulic Installation
MAN0041 (Rev. 4/4/2008)
58025 Hose Kit
Assemble and Route Hoses
1. Attach a 90-degree elbow (2) and male quick cou-
pler (3) to each loader supply hose (1).
2. Connect loader supply hoses to loader feedlines
as shown in Figure 7.
3. Route hydraulic hoses along loader mount, under
the right side of operator's platform, and over the
rear axle. See Figure 8.
NOTE: Hoses must be routed so that they are not
pinched, bent sharply, or chafed during operation.
Hoses must not interfere with any tractor control
operation or contact any moving parts.
1. 53670 Hose, 150" x 3/4 JICM x 3/4 JICM
2. 313053 Elbow, 3/4 JICF x 1/2 NPTM 90°
3. -------- Quick coupler, Male (not supplied)
Figure 7. Loader Feedline Connection
Figure 8. Hose Routing (Typical Installation)