Filter
Top Products
Responding to emergencies
If you need to use Emergency Disks
48
11 Remove the final disk from drive A.
12 Test the first disk in the set to ensure that you can use
it to restart your computer.
13 Store the Emergency Disk set in a safe place.
If you need to use Emergency Disks
You can use Emergency Disks to restart your computer
and scan for viruses or run DOS-based recovery utilities.
To use Emergency Disks
1 Insert Emergency Disk 1 into drive A, and then
restart your computer.
The Emergency program runs in DOS.
2 Select the program that you want to run.
For DOS program help, press the F1 key while you
are running the program.
3 Follow the on-screen instructions for inserting and
removing the Emergency Disks.
4 When the Emergency program is done, remove the
Emergency Disk from drive A, and then restart your
computer.
NIS2005.book Page 48 Sunday, August 1, 2004 3:24 PM