Filter
Top Products
Page 32
IMPORTANT: Never attempt to remove the pillows by pulling on them!
The pillows utilize a bolt-on design that prohibits removal without tools.
To remove pillows:
1. Grasp center pillow insert (A) with finger
tips and gently pry outward from pillow
base (C).
2. Use a standard screwdriver to loosen
and remove mounting bolts (B) from
pillow base.
3. Assemble in reverse order after cleaning.
DO NOT overtighten pillow mounting
bolts!
11 .6 Maintaining The Synthetic Cabinet
The optional synthetic cabinet requires little or no maintenance of any kind.
To clean, simply wipe cabinet with a clean towel and mild detergent soap
solution.
CAUTION: Never spray cabinet with a garden hose for any
reason since this action may induce an electrical short in the
spa’s electrical equipment.
11 .7 Maintaining The Cover
Using the Sundance insulating hot tub cover anytime the hot tub is not in use
will significantly reduce your operating costs, heat-up time and maintenance
requirements. To prolong the life of the cover, handle it with care and clean
it regularly using mild soap and water. Periodic treatments with a special
conditioner developed for Sundance hot tub covers will help protect against
deterioration caused by U.V. rays from the sun. Never allow anyone to stand
or sit on the cover, and avoid dragging it across rough surfaces.
11 .8 Winterizing
Your Sundance hot tub is designed to automatically protect itself against
freezing when operating properly. During periods of severe freezing tempera-
tures, you should check periodically to be certain that the electrical supply to
the hot tub has not been interrupted. In extreme, bitter cold weather (less
than -20°F) reset the filter cycles for 24-hour operation to protect the hot tub
(i.e. four 6-hour cycles).