Sundance Spas 850 Hot Tub User Manual


 
Page 28
11.0 Hot Tub Maintenance
Proper and regular maintenance of your hot tub will help it retain its beauty
and performance. Your authorized Sundance Dealer can supply you with all
the information, supplies, and accessory products you will need to accom-
plish this.
11 .1 Cleaning The Filter
A programmable “Change Filter” reminder flashes on the
control panel display after a specified number days to remind
you to clean (or replace) your filter cartridge(s). This
reminder must be reset at each cleaning interval. Refer to section 10.3
(page 26) for additional information and programming details.
Your Sundance hot tub is equipped with an exclusive MicroClean
TM
2-stage
filter located under the filter lid (Figure-F, Page 17). Fine debris is filtered by
the circulation pump drawing water through the smaller (stage 2) cartridge.
Larger debris is filtered by the main 2-speed pump drawing water through
the larger (stage 1) cartridge during normal operation and at each skim-
ming/heating cycle. Both halves work together to give you unsurpassed
water quality! T
o ensure optimum performance, clean and reuse the stage
1 cartridge once a month and throw-out (replace) the stage 2 cartridge
every 3 months, or as needed.
All models include filters on their footwell suction covers (shown
right) that prevent debris from entering pump 2 and the diverter
valve(s), when operating. These filters must remain in place to
protect these components from debris entrapment/damage. They
should be cleaned every 2 months, or when weak pump 2 performance is
observed.
ALWAYS TURN POWER TO THE HOT TUB OFF BEFORE CLEANING
THE FILTER CARTRIDGE! To accomplish this, refer to the following filter
cleaning/ replacement procedure:
CHANGE
FILTER