Filter
Top Products
Page 21
In the Altamar, the massage selector on the high-speed pump #2 system
diverts between the therapy seat and whirlpool jets in the footwell and on the
side wall. The 2-speed pump #1 system powers the therapy jets in the lounge
and other seats.
In the Capri, the massage selector diverts between the therapy seat all other
jets.
8.9 Adjusting Fluidix Intelli-Jets
The Fluidix Intelli-Jets in your new spa offer the advantage of no moving
parts and zero maintenance. They can also be adjusted for a high and low
impact massage, providing the ultimate massage! Each jet has its own
water volume and directional or oscillating flow adjustment. The jet’s outer
dial controls water volume (flow rate) and it’s center “mode disk” selects
either an oscillating or directional flow massage.
To Adjust Jets
1. Turn outer dial (A) clockwise to incr
ease water volume.
Turn outer dial counterclockwise to decr
ease water
volume or to shut jet off.
2. Rotate center “mode disk” (B) clockwise to select a
non-oscillating water stream or turn counterclockwise
to select an oscillating stream at any angle.
3. For a high impact massage, turn corresponding air
control knob clockwise. For low impact massage, turn corresponding air
control knob counterclockwise. Refer to sections 8.3-8.4 (page18-19)
for specific operation details for your spa.
Note: Always keep at least 6 adjustable jets open at all times on
each jet system.
8.10 Air Controls
Each jet system has its own air control. These controls allow you
to regulate the amount of air which is mixed with the water
entering through the jets. Clockwise rotation adds more air and
counterclockwise rotation reduces air flow. To minimize heat
loss, these controls should be closed when the hot tub is not in
use.
A
B