Filter
Top Products
OPERATION
The stubble is not the same 1. The disk carrier bar tilts too much. 1. Reduce the tilt of the disk
carrier bar.
2. The knives are over worn. 2. Replace the knives.
3. Power takeoff speed is insufficient. 3. Increase power takeoff rotation
speed up to, but not over, 540
revs/min.
OPERATION
The forge is pushed forward before
being cut.
1. The ventilating effect of the knives is
too strong.
1. Reduce power takeoff rotation
speed and increase tractor
forward movement speed.
AGM 52-62-72-82
10/10
Operation Section 4-46
© 2010 Alamo Group Inc.