Filter
Top Products
ASSEMBLY
STEP 21. Fasten the folded blade to the “windrow-former” by means of 3 set hexagon head screws M10x30 and 3 self-
locking nuts M10 as shown in the Picture.
STEP 22. Hook the mower to the support rod and raise slightly the machine so as to be able to insert the “shoe” under the
reduction gear.
Picture 22.2
STEP 23. Fasten the “shoe” to the mowing bar by means of 2 hexagon head screws M12x30 and 2 self-locking nuts M12 for
rear fastening (Picture 23.1) and 2 flanged hexagon head screws M10x20 for front fastening (Picture 23.2).
Picture 23.1 Picture 23.2
ASSEMBLY
AGM 52-62-72-82
10/10
Assembly Section 3-13
© 2010 Alamo Group Inc.