Filter
Top Products
ASSEMBLY
STEP 17. Connect the support rod to the mower; fasten the connection plate with 4 hexagon head screws M12x35 and 4 flat
washers M12. Screws must be previously treated with “self-locking thread device”.
STEP 18. Remove the tap from the cylinder (Picture 18.1) and the spindle with the lubricator by keeping the lubricator
downwards. Mount the cylinder in the support with the pin and 1 washer Ø30 (Picture 18.2). To lock the pin insert 1 split pin
6x50 (Picture 18.2) and keep it slightly open.
Picture 18.1
Picture 18.2
ASSEMBLY
AGM 52-62-72-82
10/10
Assembly Section 3-11
© 2010 Alamo Group Inc.