Filter
Top Products
OPERATION
Information on the Machine
The materials used for building RHINO mowers have been chosen according to the tasks for which the machine has
been designed and built: any non-conforming use can cause damages to persons and property and affect the
operation of the machine.
Conforming use of the mower also specifically includes compliance with operating, repair and maintenance instructions
contained in this manual.
RHINO is in no event liable for non-conforming use of the machine.
RHINO is not liable for any damages and injuries, including severe injuries, to operator and other people or property
resulting from any unauthorised changes or modifications to the machine.
Proper operation of the machine and compliance with the instructions contained in the manual and safety precautions
will reduce the risk of accidents and injuries and ensure higher performance, while extending machine life and reducing
the risk of troubles to the lowest level.
RHINO shall in no event be liable for failure to comply with the safety
instructions given in the manual.
Identification of the machine
The machine identification plate, located on the frame, bears the Manufacturer’s data, the model, the
serial number and the mass of the machine.
Location of EC plate on the machine:
When ordering spare parts always use the model number, frame number and year of manufacturing.
OPERATION
AGM 52-62-72-82
10/10
Operation Section 4-2
© 2010 Alamo Group Inc.