Filter
Top Products
OPERATION
Tractor Pre-Operation Inspection/Service
Refer to the tractor operator’s manual to ensure a
complete pre-operation inspection and scheduled
service is performed according to the manufacturers
recommendations. The following are some of the
items that require daily service and inspection:
• Tire condition/air pressure
• Wheel lug bolts
• Steering linkage
• PTO shield
• SMV sign is clean and visible
• Tractor’s lights are clean and functional
• Tractor Seat belt is in good condition
• Tractor ROPS is in good condition
• ROPS is in the raised position
• No tractor oil leaks
• Radiator free of debris
• Engine oil level and condition
• Engine coolant level and condition
• Power brake fluid level
• Power steering fluid level
• Fuel condition and level
• Sufficient lubrication at all lube points
• Air filter condition OPS-U-0030
OPERATION
Mower Pre-Operation Inspection/Service
Before each mower use, a complete inspection and service is required to ensure the mower is in a good and safe
working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure the
mower is ready for operation, conduct the following. OPS-R-0007
The operator’s manual and safety signs affixed on the
unit contain important instructions on the safe and
proper use of the equipment. Maintain these important
safety features on the implement in good condition to
ensure the information is available to the operator at
all times.
• Ensure the manual canister is secured to the
equipment with the operator’s manual inside.
• Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible decals. OPS-
U- 0011
AGM 52-62-72-82
10/10
Operation Section 4-24
© 2010 Alamo Group Inc.