Filter
Top Products
OPERATION
A. Curtain
B. Lift arms couplings
C. Stand
D. Inner cover
E. Support leg (drive shaft)
F. Drive belt
G. Hydraulic locking device
H. Hydraulic hose bracket
I. “Three point linkage”
J. Hydraulic cylinder
K. Gearbox
L. Windrow-former
M. Cutter bar
N. Cutter-holder discs of oval shape
O. Safety frame
P. Manual’s canister
Technical Features
The machines are drawn by the tractor by means of the three point linkage. The machines are equipped with rotary
cutter-holder discs of oval shape operated by the power takeoff of the tractor.
The mowing unit consists of a cutter bar to which quick rotating knives are attached. The product is cut as a result of
the knives action in the lower part of the stem.
Cutter bar
The cutter-holder discs of oval shape have a special contour profile which ensures sturdiness even under difficult
working conditions.
All machines are equipped with a safety release device. If an obstacle is hit, the safety release device allows the
cutter bar to swing back, thus reducing significantly the risk of damages to the machine.
All gearings are encased in oil bath box.
OPERATION
AGM 52-62-72-82
10/10
Operation Section 4-5
© 2010 Alamo Group Inc.