Sears 917.275223 Lawn Mower User Manual


 
5. Move motion control lever to neutral
(N) position.Shut- off engine and set
parking brake.
6. Engage transmission by placing
freewheel control In driving position
(See =TOTRANSPORT" inthis section
of manual).
7. Sittingin the tractor seat, startengine.
After the engine is running, move
throttlecontrolto half (1/2) speed.
Disengage parking brake.
8. Slowly move motion control lever
forward, after the tractormoves
approximately five (5) feet, slowly
move motioncontrel lever to reverse
position.After the tractor moves
approximately five (5) feet return the
motioncontrollever to the neutral (N)
position. Repeat this procedure with
the motioncontrol lever three (3)
times.
Your tractoris now purged and now ready
for normal operation.
MOWlNGTIPS
Tire chains cannot be used when the
mower housingisattached to tractor.
Mower should be propedy leveled for
best mowing performance. See =TO
LEVEL MOWER HOUSING" in the
Service and Adjustmentssection of this
manual.
The left hand side of mower shouldbe
used for trimming.
Drive so that clippings are discharged
ontothe area that has been cut. Have
the cut area tothe dght ofthe tractor.
Thiswill result in a more even distdbu-
tion of clippingsand more uniform
cutting.
When mowing large areas, start by
turningto the dghtso that clippingswill
discharge away from shrubs,fences,
driveways, etc. Afterone or two
rounds, mow in the oppositedirection
making left hand turns untilfinished.
Ifgrass Is extremely tall,it should be
mowed twice to reduce loadand
possible fire hazard from dded dip-
pings. Make firstcat relatively high;the
second to the desired height.
Do notmow grasswhen it iswet. Wet
grass will plug mower and leave
undesirable clumps. Allow grass todry
before mowing.
Always operate engine at full throttle
when mowing toassure bettermowing
performance and proper discharge of
material. Regulate ground speed by
selecting a low enough gear to give the
mower cuttingperformance as well as
the quality of cut desired.
When operating attachments,select a
ground speed that will suit the terrain
and give best performance of the
attachment being used.
2O