Filter
Top Products
27
777S32066
DANGER
AVOID INJURY FROM
ROTATING AUGER -
KEEP HANDS, FEET
AND CLOTHING AWAY.
KEEP AWAY FROM ROTATING IMPELLER
AND AUGER. CONTACT WITH IMPELLER OR
AUGER CAN AMPUTATE HANDS AND FEET
.
USE CLEAN-OUT TOOL TO UNCLOG
DISCHARGE CHUTE.
DISENGAGE CLUTCH LEVERS, STOP ENGINE,
AND REMAIN BEHIND HANDLES UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING OR SERVICING MACHINE.
TO AVOID THROWN OBJECTS INJURIES,
NEVER DIRECT DISCHARGE AT BYSTANDERS.
USE EXTRA CAUTION WHEN OPERATING ON
GRAVEL SURFACES.
READ OPERATOR'S MANUAL.
1.
2.
3.
4.
5.
DANGER
CLEAN-OUT TOOL
777S32065
DANGER
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPUTATE FINGERS
AND HANDS. USE CLEAN-OUT TOOL TO
UNCLOG DISCHARGE CHUTE.
DO NOT UNCLOG DISCHARGE CHUTE WHILE
ENGINE IS RUNNING.
SHUT OFF ENGINE AND REMAIN BEHIND
HANDLES UNTIL ALL MOVING PARTS HAVE
STOPPED BEFORE UNCLOGGING.
(CENTER MODEL PLATE
WITH TOP OF FRAME COVER)
777D03094
777D00334
777I20329
777I20330
AUGER
CONTROL
TRACTION
CONTROL
STEER
P
O
WERED
S
TEERIN
G
9.0/28
ELECTRIC START
LEFT TURN CONTROL
AUGER CONTROL
CHUTE
DIRECTIONAL CONTROL
CLOCKWISE TO
DISCHARGE LEFT
COUNTER CLOCKWISE
TO DISCHARGE RIGHT
CHUTE
TILT
CONTROL
F
R
6
5
4
3
2
1
R1
R2
TRACTION CONTROL
RIGHT TURN CONTROL
FOR STEERABLE OPERATION:
SQUEEZE LEFT TURN CONTROL TO STEER
SNOWTHROWER TO THE LEFT. SQUEEZE RIGHT
TURN CONTROL TO STEER SNOWTHROWER
TO THE RIGHT.
•
READ OPERATORS MANUAL BEFORE STARTING.
•
INSERT IGNITION KEY INTO SLOT.
MAKE SURE IT SNAPS INTO PLACE.
DO NOT TURN KEY.
•
RECOIL STARTER:
PUSH PRIMER 2 OR 3 TIMES.
ELECTRIC STARTER:
DO NOT PRIME.
•
PUSH START BUTTON OR PULL ROPE HANDLE
TO START ENGINE.
•
SELECT SPEED REQUIRED. SQUEEZE RIGHT
TRACTION CONTROL LEVER TO MOVE.
RELEASE TO STOP.
ALWAYS RELEASE TRACTION CONTROL
LEVER BEFORE CHANGING SPEEDS.
•
FOR SNOWTHROWING, ENGAGE LEFT AUGER
CONTROL LEVER BEFORE TRACTION
CONTROL LEVER.
•
IMPORTANT: THIS MACHINE IS EQUIPPED
WITH AN AUGER CONTROL LOCK.
TO STOP AUGER, BOTH AUGER CONTROL
AND TRACTION CONTROL LEVERS MUS T
BE RELEASED.
TO STOP ENGINE, PULL OUT IGNITION KEY.
LEFT TURN CONTROL
AUGER CONTROL
CHUTE
DIRECTIONAL CONTROL
CLOCKWISE TO
DISCHARGE LEFT
COUNTER CLOCKWISE
TO DISCHARGE RIGHT
TRACTION CONTROL
RIGHT TURN CONTROL
FOR STEERABLE OPERATION:
SQUEEZE LEFT TURN CONTROL TO STEER
SNOWTHROWER TO THE LEFT. SQUEEZE RIGHT
TURN CONTROL TO STEER SNOWTHROWER
TO THE RIGHT.
•
READ OPERATORS MANUAL BEFORE STARTING.
•
INSERT IGNITION KEY INTO SLOT.
MAKE SURE IT SNAPS INTO PLACE.
DO NOT TURN KEY.
•
RECOIL STARTER:
PUSH PRIMER 2 OR 3 TIMES.
ELECTRIC STARTER:
DO NOT PRIME.
•
PUSH START BUTTON OR PULL ROPE HANDLE
TO START ENGINE.
•
SELECT SPEED REQUIRED. SQUEEZE RIGHT
TRACTI ON CO NT RO L L EV ER TO M OVE .
RELEASE TO STOP.
ALWAYS RELEASE TRACTION CONTROL
LEVER BEFORE CHANGING SPEEDS.
•
FOR SNOWTHROWING, ENGAGE LEFT AUGER
CONTROL LEVER BEFORE TRACTION
CONTROL LEVER.
•
IMPORTANT: THIS MACHINE IS EQUIPPED
WITH AN AUGER CONTROL LOCK.
TO STOP AUGER, BOTH AUGER CONTROL
AND TRACTION CONTROL LEVERS MUST
BE RELEASED.
TO STOP ENGINE, PULL OUT IGNITION KEY.
CHUTE
TILT
CONTROL
F
R
6
5
4
3
2
1
R1
R2
777I20729
777I20728
777I20727
777D05309
(MODEL PLATE CENTERED
WITH TOP OF FRAME COVER)
9.0 HP
ELECTRIC START
R
READ INS
T
RUC
T
I
O
NS BEF
O
RE S
T
AR
T
IN
G
LABELS LIST & LOCATION