Radware VOYA-GRAND-PMH Lawn Mower User Manual


  Open as PDF
of 56
 
Page 22
7075-166
September 25, 2012
R
VOYAGEUR GRAND Wood Insert
D. Blower Replacement
1. The grille on the blower access assembly is hinged.
Swing the grille downward to expose the 2 screws.
Figure 22.1.
2. Remove the 2 screws from the blower access assembly
and slide assembly away from the appliance.
3. Disconnect the wires from the blower.
4. Removethe2screwsfromtheholddownbracketand
pulltheblowerandbracketforward.
5. Removetheblowerfromtheholddownbracket.
6. Remove the protection guards from each end of the
blower.
7. Re-install in reverse order. Be certain that the hold down
bracket’s screws are completely seated in the grom-
ments.Insertthelocatingtabintheholddownbracket
into the placement slot.
Shock Risk.
• DoNOTremovegroundingprongfromplug.
• Plugdirectlyintoproperlygrounded3prong
receptacle.
• Routecordawayfromappliance.
•
DoNOTroutecordunderorinfrontofappliance.
CAUTION
Figure 22.1
DoNOTallowhotcoalsoremberstooverowashlip
• May melt protective wire coating on fan power
cordcausingelectricalshort,reorinjury
Fire Risk.
WARNING
Blower Access
Assembly
Grille hinges
downward
Remove Screws &
Pull Access Assembly
away from Insert
Hold Down
Bracket
Remove Screws from Hold
Down Bracket and Pull
Forward
Placement Slot
CAUTION! Unplug appliance
from power source before
replacing any components.
 previous next