Filter
Top Products
5. Select the desired mode: TTL,
AA, or M. Push the multi-selector
right to save settings. Note that
when M is selected you must
choose the flash output level
before you can save the settings.
When using the D70/D70s built-
in flash as a commander, be sure
to set your remote Speedlights to
Channel 3 Group A, otherwise
the Speedlight won’t fire.
D200 as a master
To use the D200 built-in flash as a master:
1. Turn on the camera and press
the Menu button to the left of
the LCD.
2. Enter the CSM (Custom Settings
menu) by using the multi-
selector to scroll down to the
Pencil icon.
3. Using the Multi-selector button,
highlight CSM e – Bracketing/
Flash and push the multi-
selector right to select the
flash menu.
This CSM is also where you
adjust the Channels as well as
the group settings, modes, and
flash output compensation.
4. Scroll down to setting e3 –
Built-in Flash and push the
multi-selector right to select
which mode the built-in
Speedlight functions in.
5. Highlight Commander mode and
push the multi-selector right.
This brings you to the wireless set-
ting menu.
6. Use the multi-selector left and
right buttons to highlight the
mode setting for the built-in
flash.
7. Use the multi-selector to move
up or down to select the pre-
ferred mode.
Note
Note
Chapter 4 ✦ Wireless Flash Photography with the CLS 79
19 Commander mode
AA
M
TTLTTL
AA
FULL
OK
4.1 The Commander mode menu on the
D70
e3Built-in Flash Mode
Commander Mode
Built-in
Group A
Group B
Channel
Move Set OK
ModeComp
——
TTL
TTL
0
1/1
0
3 CH
ENTER
4.2 The D200 built-in flash Custom Settings
menu
10_045275 ch04.qxp 11/28/06 8:27 PM Page 79