Filter
Top Products
3. Press the SEL button again to
highlight Group A.
4. Use the + or – buttons to adjust
the output level.
5. Repeat the steps to adjust
Groups B and C.
Using a built-in
Speedlight
To set output level compensation using the
built-in Speedlight on a D70/D70s:
1. Turn on the camera and press
the Menu button to the left of
the LCD.
2. Enter the CSM using the multi-
selector to scroll down to the
pencil icon.
3. Scroll down to CSM number 19 –
Flash mode and push the multi-
selector right.
4. Scroll down to Commander
mode and push the multi-
selector right.
5. Select the desired flash mode:
TTL, AA, or M. Push the multi-
selector right to save settings.
6. While pressing the D70/D70s
flash level button, use the front
control dial to set the desired
level of exposure compensation.
Because the D70/D70s built-in
Speedlight only controls one
group of remote Speedlights,
the output compensation level
applies to all remote Speedlights.
Note
Chapter 4 ✦ Wireless Flash Photography with the CLS 85
4.4 Flash exposure level compensation button on the D70
10_045275 ch04.qxp 11/28/06 8:27 PM Page 85