Filter
Top Products
WARNING
Beforeoperatingthis
machine,makesure
the seat is engaged in
the seat stop; stand
behindthemachine
andpu,backonseat
fu,yengaged
intostop:
NOTE: Forsh pping rea:
s0nsl Seatsareeither
fastenedto the tractor
seat's pivotbraCketWitt
a plastiCtie, or mounted
backwardto the pivot
bracket. In either case;
free the seatform its
shipping p0sitionand
remove the two Box
screws (or knobsion
models so equipped)
from thebottom of seat
before proceedingwith
applicable instructions:
Attaching The Seat
Seatstylesvarybytractormodelandtherearethree
differentstylesavailable:
• StandardAdjustment
• QuickAdjustment&
• KnobAdjustment
If the seatforyourtractordid notcomeattached,referto
Figure4, Figure5, and Figure6 toidentifyyourtractor's
seatstyleandfollowtheapplicableinstructionsbelowto
attachit.
Figure 4
NOTE:Forshippingreasons,seatsareeitherfastened
tothe tractorseat'spivotbracketwitha plastictie,or
mountedbackwardto thepivotbracket.Ineithercase,
freetheseatformitsshippingpositionand removethe
twohexscrews(or knobs,onmodelssoequipped)from
thebottomof seatbeforeproceedingwithapplicable
instructionsbelow.
Standard Adjustment Seat
1. Positionthe shoulderscrews(foundonthe baseof the
seat)insidetheslotopeningsintheseatpivotbracket.
Figure4.
2. Slidethe seatslightlyrearwardintheseatpivot
bracket,liningupthe rearslotsinthe pivotbracket
withtheremainingtwo holesintheseat'sbase.
3. Selectdesiredpositionforthe seat,andsecurewith
thetwohex screwsremovedearlier.SeeFigure4.
Quick Adjustment Seat
NOTE:Ifyourseatwasshippedmountedbackwardson
theseatpivotbracket,pulloutthe tabfoundonthe seat
stopandholditopenwhileslidingthe seatoff theseat
pivotbracket.SeeFigure5.
Figure 5
1. Lineupthe plasticseatspacerswiththeslotsin seat
pivotbracket.
2. Slideseatinuntilfrontseatspacerengagestheseat
stop.SeeFigure5.
WARNING" Before operating this
machine, make sure the seat is
engaged inthe seat stop, stand
behind the machine and pull back
on seat until fully engaged into
stop.
Figure 6
Knob Adjustment Seat
1. Positionthe shoulderscrews(foundonthe baseof the
seat)insidetheslotopeningsintheseatpivotbracket.
Figure6.
2. Slidethe seatslightlyrearwardintheseatpivot
bracket,liningupthe rearslotsinthe pivotbracket
withtheremainingtwo holesintheseat'sbase.
3. Selectdesiredpositionforthe seat,andsecurewith
thetwoknobsremovedearlier.SeeFigure6.
10