Filter
Top Products
MITSUBISHI
ELECTRIC
9700 SERIES UPS
OWNERS / TECHNICAL MANUAL
Page Number:
2-7
MITSUBISHI ELECTRIC 9700 SERIES UPS
2.3.2 INPUT POWER FAILURE
During an Input Power Failure the UPS will run on the Batteries. The following will be
displayed. The indication of battery operation, load factor, and bar graph.
FIGURE 2.11 Battery Operation Screen
The LCD will display a battery low voltage announcement when battery capacity is
near depletion.
FIGURE 2.12 Battery Low Voltage Screen
The End of Battery Discharge announcement is displayed when the battery end
voltage is reached. At that time, the inverter will perform an electronic shutdown to
prevent battery loss of life typical of extreme deep discharge conditions. The inverter
will automatically restart to power the load and the batteries will be simultaneously
recharged after input power is restored. Details of the End of Battery announcement
is shown in Figure 2.13.
FIGURE 2.13 Discharge Termination Screen