Land Pride WC1503 Chipper User Manual


 
10
Introduction
WC1503 Wood Chipper 328-085M
Table of Contents
12/15/15
Introduction
The parts on your Wood Chipper have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
Model No. _____________Serial No. _______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 35. Always provide model
number and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new Wood
Chipper. If for any reason you do not understand any part
of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure that person is aware of any
problems you may have and has had the opportunity
to assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
35249
Land Pride welcomes you to the growing family of new
product owners.
This Wood Chipper has been designed with care and built
by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of satisfactory use from this machine.
Application
The Land Pride WC1503 Wood Chipper is designed and
built by Land Pride to reduce unwanted tree limbs into
useful landscape mulch typically found in flower beds,
gardens or just about anything you want to help retain
moisture or just to aid in decomposition. It has uses and
applications in farming, ranching, nurseries, campuses,
estates, residential sites, and construction sites.
The WC1503 model is adapted for 3-Point Cat. l hitch on
12 to 30 hp subcompact tractors with 540 PTO speed. It
features a self-feeding 3" cutting capacity, four reversible
and replaceable hardened-steel knives, adjustable
discharge chute, and dual B-section drive belts. Support
stands are also adjustable to better match your tractor.
See “Specifications & Capacities” on page 30 and
“Features & Benefits” on page 31 for additional
information and performance enhancing options.
Using This Manual
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
To order a new Operator’s or Parts Manual contact your
authorized dealer. Manuals can also be downloaded,
free-of-charge from our website at www.landpride.com.
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
Owner Assistance
The Online Warranty Registration should be completed
by the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.