Filter
Top Products
7
Section 1: Assembly & Set-Up
5/21/07
RBT55120 Rear Blades 301-172M
Land Pride
Table of Contents
Tractor Requirements
Weight & Horsepower
Tractor rating should be between 90 - 180 horsepower.
Tractors outside this range must not be used.
3-Point Hitch Assembly
A 3-Point Category ll or lII hitch is required. The lower
3-Point arms of the 3-Point hitch must be stabilized to
prevent side-to-side movement. Most tractors have sway
blocks or adjustable chains for this purpose.
Hydraulic Outlets
The number of required hydraulic duplex outlets at the
tractor is dependent upon how the 3-Way Rear Blade is
set-up.
• No outlets are required if the 3-WayRear Blade is set-up
with manual links and ratchet jacks only.
• One to three duplex outlets are required if the 3-Way
Rear Blade is set-up with any one or more of the
following hydraulic cylinders; Offset Cylinder, Tilt
Cylinder and Angle Cylinder. Each cylinder will require a
duplex outlet at the tractor.
• A fourth duplex outlet is required if a gauge wheel is
purchased with a hydraulic cylinder.
A Selector Valve Kit may be purchased through your
local Land Pride dealer if your tractor does not have the
required number of duplex outlets. This kit provides a
way to operate 2 cylinders with one outlet, thereby
reducing the number of outlets at the tractor by one.
NOTE: Ballast may need to be added to your tractor
to maintain steering control. Refer to your tractor’s
operator manual to determine if additional ballast is
needed.
Land Pride Selector Valve Kit
Part No. Part Description
300-154A DOUBLE SELECTOR VALVE ASSY
For use with two duplex outlets. Will allow
operation of 3 cylinders with 2 tractor outlets.
Section 1: Assembly & Set-Up