Filter
Top Products
20
Section 5: Maintenance & Lubrication
RBT55120 Rear Blades 301-172M
5/21/07
Land Pride
Table of Contents
Section 5: Maintenance & Lubrication
Lubrication
Blade Pivot Shaft
Type of Lubrication: Multi-purpose Grease
Quantity = Until grease emerges
12512
Blade Tilt Shaft
(Blade must be lifted off the ground for lubrication)
Type of Lubrication: Multi-purpose Grease
Quantity = Until grease emerges
12542
50
hrs
Multi-purpose
spray lube
Multi-purpose
grease lube
Multi-purpose
oil lube
Intervals in hours at which
lubrication is required
Lubrication
Legend
Maintenance
Proper servicing and adjustment is the key to the long life
of any implement. With careful and systematic
inspection, you can avoid costly maintenance, time and
repair.
After using your 3-Way Rear Blade for several hours,
check all bolts to be sure they are tight.
Replace any worn, damaged or illegible safety labels by
obtaining new labels from your Land Pride Dealer
!
WARNING!
Do not alter the 3-Way Rear Blade. Altering the Rear Blade
can adversely affect its performance and reliability causing
damage to the blade, tractor and/or bodily injury. Always
replace damaged parts with original Land Pride parts.
!
DANGER!
Always secure the 3-Way Rear Blade in the up position with
solid supports before servicing under the Rear Blade. Never
work under equipment supported by hydraulics. Hydraulics
can drop equipment if controls are actuated or if hydraulic
lines burst. Either situation can drop the 3-Way Rear Blade
instantly even when power to the hydraulics is shut off.
!
DANGER!
Avoid injury from falling moldboard by always checking to make
sure all hardware is secured properly before rotating blade.
Moldboard will fall if 3/4" pivot bolts or 1/2" tilt bolt and
associated lockwashers are missing. A falling moldboard can
damage the equipment, cause bodily injury and/or death.
25
Hours
Seasonally