Filter
Top Products
7
Introduction
9/24/08
RCR2684 Rotary Cutter 312-785M
Land Pride
Table of Contents
Introduction
Owner Assistance
The Warranty Registration card should be filled out by
the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
If customer service or repair parts are required contact a
Land Pride dealer. A dealer has trained personnel, repair
parts and equipment needed to service the Rotary
Cutter.
The parts on your Rotary Cutter have been specially
designed and should only be replaced with genuine Land
Pride parts. Therefore, should your Rotary Cutter require
replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and
model number when ordering parts from your Land Pride
dealer. Be sure to include your serial and model numbers
in correspondence also. Refer to Figure 1 for the location
of your serial number plate.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
26625
Land Pride welcomes you to the growing family of new
product owners.
This Rotary Cutter has been designed with care and built
by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices
will help you get years of satisfactory use from the
machine.
Application
The medium duty RCR2684 Rotary Cutter is built and
designed by Land Pride for cutting on gently sloping
or slightly contoured right-of-ways, pastures, set aside
acres, and row crop fields. Its 84" cutting width makes
it compatible with the more maneuverable and lower
60 to 110 horsepower tractors with 540 rpm PTO and
category II or III three point hitches. Also it is Quick-Hitch
adaptable. The driveline is protected with a 4 plate slip
clutch.
The cutter clears grass, weeds, and light brush up to 2" in
diameter and has a cutting height range of 2" to 12" with
a cutting blade tip speed of 14,370 fpm. This unit comes
with a standard 3/16” x 27" heavy-duty oval stump
jumper and replaceable skid shoes. Optional rubber
deflectors or chain guard selections are available.
See “Section 6: Specifications & Capacities” on page 29
and “Section 7: Features and Benefits” on page 30 for
additional information and performance enhancing
options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com.
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
NOTE: A special point of information that the
operator must be aware of before continuing.
IMPORTANT: A special point of information related
to its preceding topic. Land Pride’s intention is that
this information should be read and noted before
continuing.