Filter
Top Products
17
Section 2: Adjustments
9/24/08
RCR2684 Rotary Cutter 312-785M
Land Pride
Table of Contents
Dual Tailwheel
Refer to Figure 2-5:
4. If cutting height is too high or too low, the tailwheels
must be adjusted as follows:
a. Use tractor’s 3-point hydraulic control to lift the
cutter tailwheel off the ground surface.
b. Remove attaching hardware; 1/2” -13 x 3 1/2"
GR5 hex head bolt (#1), 1/2” lock washer (#2) and
1/2” nut (#3).
c. Adjust tailwheel up or down to desired cutting
height and replace attaching hardware.
Dual Tailwheel Height Adjustment
Figure 2-5
14388