Filter
Top Products
30
Section 7: Features and Benefits
RCR2684 Rotary Cutter 312-785M
9/24/08
Land Pride
Table of Contents
RCR2684 Model
Features Benefits
Surpassed rugged industry
standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
Tractor HP Range 60-110 HP.
5 Year gearbox warranty A rugged heavy built gearbox capable of handling heavy cutting applications.
Shows Land Pride’s confidence in gearbox integrity.
Cat. 4 driveline with 4 plate
slip-clutch
Excellent gearbox protection with the slip-clutch slipping when encountering obstruction in
the blade path. Standard slip-clutch offers convenience over shear-bolts.
Cat. II or III Hitch
Quick Hitch Capability
Permits deck to follow the terrain for an even cut.
Quick Hitch provides for fast hook-up.
Lower clevis type
3-point hitch
Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even
pull from the tractor’s lower arms, vs. pulling on a single pin design.
84” Cutting width Wide cutting width, Reduces cutting time in the field.
Heavy 10 gauge
deck construction
Can withstand more abuse than lighter gauge decks.
1/4” Side panels for
overall reinforcement
Also protects sides from debris being thrown against them from the blades.
Fully welded deck Robotically welded. Adds additional strength and deck integrity.
Round back design Allows for more efficient handling and dispersing of material.
10 1/8” Deck Height Allows cutter to handle heavy cutting conditions.
2” to 12” Cutting height Provides for a wide range of cutting conditions.
Full length skids
with replaceable shoes
Full length skids protect side plate structure, replaceable shoes for convenience.
1/2” x 4” Heat-treated
free swinging blades
Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16” Oval stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output
shaft.
High blade tip speed Ensures clean cut. (14,369 fpm)
2” Diameter cutting capacity Can aid in clearing brush.
Available with single
or dual tailwheels
Dual tailwheels offer greater stability in uneven terrain.
15” Rugged Laminated
tailwheel
Laminated material is long lasting in rough conditions. Can’t go flat.
Chain or rubber shield option Located on front and rear. Reduces flying debris.
Section 7: Features and Benefits